Use Seaming Tape

Step 1

Position pond liners on top of each other, overlapping at least 4 inches; mark the location.


Step 2

Clean all liner surfaces with acetone or a similar solvent where the Seaming Tape is to be applied.


Step 3

Align Seaming Tape on bottom liner, 1 inch beyond the marked line. Unroll the tape along the entire length of the seam. 


Step 4

Before removing the backing, apply pressure along the entire length of seaming tape, ensuring maximum hold.


Step 5 

Place top liner over seaming tape. Slide backing out from under top liner. Apply pressure along entire length of seam to seal properly. 

Items you will need:

2 or more pieces of pond liner

Seaming Tape